General Specification
Manufactured under the influence of technological advances in electrocardiography ,
KARDIOPET® 600 is a compact microcontroller based, easy to use device.
KARDIOPET® 600 has the following features:
- 6.5” color TFT-LCD
- High resolution thermal printer
- Selectable printout formats for thermal printer(Auto and Manual)
- Laser printer connectivity
- Reporting measurement results of ECG
- 3,6 or 12 channel selectable, standard and special ECG display formats
- Operates on a rechargable battery, internal battery charger
- Storing 12 lead ECG trace, rhythm and measurement results to memory, viewing and printing these stored records
Package Dimensions: ~6 kg / 310x420x260 mm
|
|
ACCESSORIES
|
ECG CABLE 10 LEADS | 1 |
| ECG CHEST ELECTRODE | 1 SET (6 PCS) |
| ECG CLAMP ELECTRODE | 1 SET (4 PCS) |
| ECG PAPER (110 mm) | 1 |
| Power Cable | 1 |
|
TECHNICAL SPECIFICATIONS
SAFETY
Safety Standard |
IEC 60601-1 (1988-12) |
IEC 60601-1-am1 (1991-11) |
IEC 60601-1-am2 (1995-03) |
IEC 60601-1-am2 Corr. 1 (1995-06) |
IEC 60601-2-25 (1993-03) |
IEC 60601-2-25 (1999-05) |
Water Resistance |
IEC 529 classification IPX1 (protected against vertically dripping water) |
Mode of operation |
Continuous |
Degree of protection against electric shock |
Defibrillator proof type CF |
Electromagnetic compatibility
- IEC60601-1-2 (2001)
ENVIRONMENT
Temperature (operating) |
10 – 40 °C |
Temperature (transport and storage) |
-20 – 50 °C |
Humidity (operating) |
<= 15 % |
Humidity (transport and storage) |
<= 15 - 95 % |
Altitude (operating) |
-170 to 3000 m |
GENERAL
Dimensions |
310 x 420 x 260 mm |
Weight |
6 kg |
POWER REQUIREMENT
Operating Voltage |
100 - 240 VAC |
Line Frequency |
50 Hz |
Power Input |
100 VA |
Battery |
2.2 AH, 12 V lead-acid battery (rechargeable) |
EXTERNAL INPUT/OUTPUT
Serial I/O |
Communication Method : RS232 |
Baud Rate : 115200 |
Paralel Port Output |
Connection only specified laser printers |
DISPLAY
DisplayType |
6.5 “ color TFT-LCD display |
Vision Angle |
Horizantal: Right side 50 ° , Left side 50 °
Vertical: Up side 35 ° , Down side 45 °
|
Display Area |
132.5 (H) x 99.4 (V) mm |
Display Colors |
262144 colors |
Number of Pixels |
640 x 480 |
Pixel size |
0.207 mm(H) x 0.207 mm(V) |
Contrast Ratio |
250 : 1 |
Brightness |
300 cd/m² |
Screen Illumination |
2 cold cathode fluorescent lamps |
Power Consumption |
5.0 W (Power dissipation of the inverter does not include.) |
Number of channels |
3/6/12 |
Freeze |
- You can freeze whole screen
- You can freeze 2/3 of screen and real time ECG signal is sweeping on 1/3 of screen
|
THERMAL PRINTER
Print Method |
Thermal dot-line printing |
Resolution |
8 dots/mm |
Number of dots per line |
832 |
Record Width |
110 mm |
Record Speed |
12.5mm/s,25mm/s,50mm/s,100 mm/s |
Record Modes |
Auto Mode: Record all derivations at one keypress,
Manual Mode: Records either 3 channel waveform + rhythm lead, or 6 channel waveform
|
Record Length |
Adjustable between 5 to 10 seconds in steps of 1 sec. |
Record Start point |
Adjustable between 0 to 5 seconds in steps of 1 sec. |
LASER PRINTER
Accepted Media Size |
Sheet – A4 (210mm x 297mm) |
Supported Language |
Postscript |
Interface Type |
Parallel - 36 pin Centronics (IEEE 1284B) |
ECG
Leads |
Standard 12 leads: I,II,III,aVR,aVL,aVF,V1,V2,V3,V4,V5,V6 |
Sensitivity |
2.5mm/mV, 5mm/mV, 10mm/mV, 20mm/mV |
Sweep Rate on screen |
12.5mm/s,25mm/s,50mm/s,100mm/s |
Systole Indicator |
With sound and image |
Frequency response |
0.05 Hz – 150 Hz (unfiltered)
0.5 Hz – 35 Hz
(filtered for HUM+DRIFT+EMG)
|
Time Constant |
> 3.2 second (filter off) |
Input Impedance |
> 20 Mohm,defibrillator protected |
Leakage Current |
< 10 uA |
CMRR |
> 100 dB |
Heart Rate Range |
30 – 300 bpm |
Warning: 1- Our continuing product improvement program makes specifications subject to change without prior notice.
2- PETAS®, KARDIOPET®, KMA®, PETKOT®, MK®, PM® are registred
trademark of PETAS® INC.
|